Compare Car Insurance

Saturday, May 10, 2008

What is a Hostname?

A name is a label that is used to distinguish one thing from another. A person’s name, for instance, comprises a set of alphabetic characters that allows a person to be individually addressed. Computers are also named to differentiate one machine from another and to allow for such activities as network communication.

Computers have always needed unique addresses to talk to each other. With the advent of the Internet, the requirements for enabling computers to communicate with each other on a network included the concept of the hostname. The hostname began as a simple string of alphanumeric characters (and possibly a hyphen) and has evolved to its current definition, where hostname means a Fully Qualified Domain Name (FQDN) that absolutely and uniquely identifies every computer hooked up to the Internet via the Domain Name Service (DNS) naming hierarchy.

The true “name” a computer needs in order to communicate on a network is actually a set of numbers. The original computers connected as the Internet used small integers as the host number. For TCP/IP, the main protocol used by the Internet, each computer has a network IP address that follows a specific set of rules to assure its uniqueness and validity. (Additionally, port numbers further specify the access points for particular services on a computer).

It has always been user friendly to associate a host name with a computer (while the computer maintained its internal numerical host number or network address). One of the initial Internet RFCs, “Standardization of Host Mnemonics” lists the table that associated host numbers with their corresponding host names for the first Internet computers. This table was kept in a file called HOST.TXT that was stored on every computer that wished to communicate.

While the original file was not so daunting at 20 entries, it became quickly apparent that this solution was not scalable or flexible enough as the number of host computers connected to the Internet exploded. In order to accommodate the problem of connecting all of the new computers being added to the Internet, a hierarchical database of host names was created called DNS. DNS associates host names with their IP addresses. A complete domain name (that is, an FQDN) includes the name of the host concatenated with its domain name. This naming convention allows for a hierarchy of domain names with the host name being the most specific (and “left-most”) part.

The rules for a host name were first standardized in the original host name specification, “DoD Internet Host Table Specification”. It states that the name should be a text string consisting of the letters A through Z (upper or lower case), digits 0 through 9, the minus sign (-), and the period (.). Note, the period is only allowed as the last character of the host name if it is the delimiter of the full domain name (FQDN). No spaces are permitted as part of a name. The first character must be an alphabetic character and the last character must not be a minus sign or period. It was also recommended that the host name be no longer than 24 characters in length. Subsequently, in "Requirements for Internet Hosts - Application and Support", the host name rules were updated. The first character could now be either a letter or a digit and software dealing with host names must handle names up to 63 characters in length.

In common usage today, hostname refers specifically to the FQDN that comprises the name of the host, a period, and the domain name. The domain name is composed of labels that begin with the top-level domain and are arranged right to left for the second and, possibly, third level labels. The host name and the domain labels are separated by periods. The total length of the hostname as an FQDN cannot exceed 255 character with each domain name label having a maximum length of 63 characters. For example, if a company’s domain name is “example.com.” and a particular computer in the company has been named “plato”, the hostname for that computer will be “plato.example.com.”. Note, that technically FQDNs end in a period to unambiguously define the hostname and to be sure that it is not part of a longer domain name. (although in common usage this final period is often omitted).

The exact rules for the new hostname definition that has evolved is also more rigorous than that of the related original host name specification. The DNS naming rules are explained in “Domain Names – Concepts and Facilities”, “Domain Names – Implementation and Specification”, and “Clarifications to the DNS Specification”.

To summarize, a hostname is a Fully Qualified Domain Name that uniquely and absolutely names a computer. It is composed of the host name and the domain name. The domain name in turn is one or more domain labels that place the computer in the DNS naming hierarchy. The host name and the domain name labels are separated by periods and the total length of the hostname cannot exceed 255 characters.

Now that the syntax of the name of the host as part of the hostname is understood, how does one choose a good name for their computer? Several web sites offer suggestions and the choice is up to the system administrator whose whimsy is only limited to the fact that no two computers in one domain space can have the same host name (because the two computers would have the same hostname!).

RFC 1178, “Choosing a Name for Your Computer” contains several guidelines on how to name—and how not to name—your computers.

A summary of sample guidelines for good host names:

  • Use words/names that are rarely used.
  • Use theme names.
  • Use real words.
  • Don't worry about reusing someone else's hostname.
  • There is always room for an exception.
And some sample guidelines for not so good host names:
  • Don't overload other terms already in common use.
  • Don't choose a name after a project unique to that machine.
  • Don't use your own name.
  • Don't use long names.
  • Avoid alternate spellings.
  • Avoid domain names.
  • Avoid domain-like names.
  • Don't use antagonistic or otherwise embarrassing names.
  • Don't use digits at the beginning of the name.
  • Don't use non-alphanumeric characters in a name.
  • Don't expect case to be preserved
As a final note, the terms “host name” and “hostname” are often used interchangeably, so be sure to clarify when the term is being used as to whether just the name of the host or the computer’s FQDN is being referenced. To see this on a Linux system, by example, the hostname command returns the FQDN while adding the –s option (i.e., hostname –s) returns just the name of the host.

What is a Proxy Server?

A proxy server is a computer that offers a computer network service to allow clients to make indirect network connections to other network services. A client connects to the proxy server, then requests a connection, file, or other resource available on a different server. The proxy provides the resource either by connecting to the specified server or by serving it from a cache. In some cases, the proxy may alter the client's request or the server's response for various purposes.

Web proxies

A common proxy application is a caching Web proxy. This provides a nearby cache of Web pages and files available on remote Web servers, allowing local network clients to access them more quickly or reliably.

When it receives a request for a Web resource (specified by a URL), a caching proxy looks for the resulting URL in its local cache. If found, it returns the document immediately. Otherwise it fetches it from the remote server, returns it to the requester and saves a copy in the cache. The cache usually uses an expiry algorithm to remove documents from the cache, according to their age, size, and access history. Two simple cache algorithms are Least Recently Used (LRU) and Least Frequently Used (LFU). LRU removes the least-recently used documents, and LFU removes the least-frequently used documents.

Web proxies can also filter the content of Web pages served. Some censorware applications — which attempt to block offensive Web content — are implemented as Web proxies. Other web proxies reformat web pages for a specific purpose or audience; for example, Skweezer reformats web pages for cell phones and PDAs. Network operators can also deploy proxies to intercept computer viruses and other hostile content served from remote Web pages.

A special case of web proxies are "CGI proxies." These are web sites which allow a user to access a site through them. They generally use PHP or CGI to implement the proxying functionality. CGI proxies are frequently used to gain access to web sites blocked by corporate or school proxies. Since they also hide the user's own IP address from the web sites they access through the proxy, they are sometimes also used to gain a degree of anonymity.

You may see references to four different types of proxy servers:

  • Transparent Proxy - This type of proxy server identifies itself as a proxy server and also makes the original IP address available through the http headers. These are generally used for their ability to cache websites and do not effectively provide any anonymity to those who use them. However, the use of a transparent proxy will get you around simple IP bans. They are transparent in the terms that your IP address is exposed, not transparent in the terms that you do not know that you are using it (your system is not specifically configured to use it.)

  • Anonymous Proxy - This type of proxy server identifies itself as a proxy server, but does not make the original IP address available. This type of proxy server is detectable, but provides reasonable anonymity for most users.

  • Distorting Proxy - This type of proxy server identifies itself as a proxy server, but make an incorrect original IP address available through the http headers.

  • High Anonymity Proxy - This type of proxy server does not identify itself as a proxy server and does not make available the original IP address.

What is an IP address?

Every device connected to the public Internet is assigned a unique number known as an Internet Protocol (IP) address. IP addresses consist of four numbers separated by periods (also called a 'dotted-quad') and look something like 127.0.0.1.

Since these numbers are usually assigned to internet service providers within region-based blocks, an IP address can often be used to identify the region or country from which a computer is connecting to the Internet. An IP address can sometimes be used to show the user's general location.

Because the numbers may be tedious to deal with, an IP address may also be assigned to a Host name, which is sometimes easier to remember. Hostnames may be looked up to find IP addresses, and vice-versa. At one time ISPs issued one IP address to each user. These are called static IP addresses. Because there is a limited number of IP addresses and with increased usage of the internet ISPs now issue IP addresses in a dynamic fashion out of a pool of IP addresses (Using DHCP). These are referred to as dynamic IP addresses. This also limits the ability of the user to host websites, mail servers, ftp servers, etc. In addition to users connecting to the internet, with virtual hosting, a single machine can act like multiple machines (with multiple domain names and IP addresses).

If you are connected to Internet now, you can check your IP address by clicking here.

Friday, May 9, 2008

Common Errors in PC & Their Solutions

1. MONITOR LED IS BLINKING
Check all the connections like Monitor Cable, Data cables,RAM, Display Card , CPU connections.

2. CONTINUOS THREE BEEPS
Problem in RAM Connection.

3. THREE BEEPS ( 1 Long 2 Short)
Problem in Display Card Connection

4. THREE LONG BEEPS PERIOD WISE
Problem in BIOS or RAM (Basic Input Output System)

5. CONTINUOS NON-STOP BEEPING
Key Board Problem (I.e.; Some Key is pressed for Longer time)

6. FDD LED IS GLOWING CONTINUOSLY
Data cable to be connected properly (twisted cable).

7. NO DISPLAY ON THE SCREEN AT ALL
Hard Disk cable connected wrongly. Connect rightly seeing the Red mark (Faces power supply) and then Restart.

8. POWER LED IS OFF
a. Check main power cord
b. Check S.M.P.S.
c. Check Mother Board connection

9. SHOWING CMOS ERROR
Replace 3 Volt battery of Mother Board . Set Original Settings Manually.(Refer CMOS Setup chart)
Enter your search termsSubmit search form

10. SHOWING FDD ERROR OR FLOPPY DRIVE IS NOT WORKING PROPERLY
Check Power cord of FDD , Data Cables , set CMOS & Finally the Check drive.

11. SHOWING HDD ERROR OR HARD DISK FAILURE
a. Check Power Cord
b. Check connection of HDD
c. Check Data cable
d. Check Hard Disk parameters in CMOS or Auto detecting Setting Partitions by Fdisk Command, then format it to set track 0.

12. MOTHER BOARD HANGS DUE TO UNSTABILIZED POWER SUPPLY
a. Check S.M.P.S
b. RAM not functioning properly.
c. Software problem (due to using pirated software)
d. CPU fan not functioning properly.

13. DANCING SCREEN
a. Check Display card connection
b. Virus Problem
c. Video Memory Problem

14. SHAKING SCREEN
a. Earthing problem
b. Magnetic waves comes around.

15. CPU CABINET SHOCK
a. Check Earthing
b. Check main power cord.

16. NON-SYSTEM DISK ERROR
a. Floppy Drive having different disk (Non-Bootable Disk) OR CMOS Parameters for Hard Disk may not be set properly.
b. Hard Disk Partitions may not be created.
c. Hard Disk may not be formatted.

7. MISSING OPERATING SYSTEM
The System files missing namely Ie; command.com} - User File IO.SYS & MS_DOS.SYS } - Hidden Files. These above three files required for Start up of the system that can be transferred by using SYS C: Command OR While the time of formatting by using Format c:/u/s

18. MISSING COMMAND INTERPRETOR
May the file Command.com is corrupted OR Infected by Virus OR Some one has Erased it.

19. SHOWING I/O ERROR
a. The type of Hard Disk in CMOS may not be set properly.
b. Operating system used for formatting is not valid

20. SHOWING DIVIDE OVER- FLOW MESSAGE
a. May some Directories or Files crash with other files.
b. Use CHKDSK/F or SCANDISK Command to correct it.


21. HARD DISK MAKING NOISE WHILE PROCESSING
a. Unstabilized power supply.
b. Check for Loose Contact.
c. Do not use Y Connectors for Hard Disk.
d. It may create Bad Sector OR Weak Hard Disk.

22. HARD DISK HANGS WHILE PROCESSING
Check for Bad Sector by using CHKDSK or SCANDISK Command. If found format the Hard Disk and set Partition before that area.(This is the only procedure to use Hard Disk with Bad Sector) OR (To avoid Bad Sectors use Standard Power Supply)

23. HARD DISK NOT DETECTED
a. Check Power Connector
b. Check Data Cables
c. Check Jumpers

24. PARTITION NOT SHOWN
Operating System where the Hard Disk formatted is not supported with present Mother Board. For Eg: Hard Disk formatted with Pentium System will hide their partitions for 486 System.

25. MMX/DLL FILE MISSING
May the above files may be corrupted due to power failure or Virus. Make available above files from other Computer. OR Reinstall Windows 98 Operating System. (This procedure will not make any effect on existing Data).

26. WINDOWS REGISTRY ERROR
This will happen due to sudden ON/OFF of the system. Final solution is to Reinstall Operating System.

27. DISPLAY COLOUR DOES NOT MATCH
a. Configure Display Card properly with their CD.
b. The Standard setting for Windows is set it to 800x600 for better performance.

28. UNKNOWN DEVICE FOUND
May the Driver utility is not provided with operating system . Insert Driver CD and install software for the above Device. (Every Device requires driver utility to set active

Schedule a PC reboot, shutdown, or hibernate with WinOF

So you're in the middle of downloading a large file, or sending a huge batch of photos to your mom. The file transfer's going to take another 40 minutes, and you really want to hit the sack. But you don't want to leave your computer on all night sucking up energy.

WinOFF is a nifty utility that lets you schedule all sorts of power-related actions. You can set your computer to shutdown 60 minutes from now. Or you can tell it a specific time to shut down. There's even an option to shut down the system when your CPU is idle, under the assumption that this means your computer is probably finished with whatever task you set for it.

Don't want to do a complete shutdown? You can put your computer in suspend or hibernate mode. Or if you just want to make sure your PC is fresh and ready to go in the morning, you can schedule a middle of the night reboot.

some of the features quoted from the creator's Site:



Shut down the computer at certain hour (e.g. at 12:00).
Shut down the computer in several minutes (e.g. in 15 minutes).
Shut down the computer when the CPU becomes idle.
Several types of shut down (shut down, restart, log off, power off, suspend, hibernate and lock computer).
Option for hang up the modem instead of doing a shut down.
Option for set a password to protect the access to the configuration.
Complete command line support for batch process.
Option for capture the desktop and/or execute a program before the shut down.
Option for run the program when starting Windows session, for daily programmed shut down.
Immediate shut down and computer lock from the traybar icon menu.
Option for show an alert window, which allow the cancellation of the shut down.
Works with Windows 9x/Me/NT/2000/XP.
Dual English/Spanish version.


For more details, visit http://www.ampsoft.net/utilities/WinOFF.php

Tuesday, December 25, 2007

Big folders made easy.

Every computer user knows that no matter how big your hard drive is, useful and useless information will step by step occupy all of it. Modern software and multimedia content have become really voracious in terms of gigabytes. Do you analyze disk space analysis? To make matters worse, many applications make temporary and-or system files that may be immense and hard to locate. In many cases they clean up the mess. But as time passes by, more and more non-eliminated trash starts to slow down your computer. And you have to do that again: reinstallation, disks reformatting to have a couple of months of normal work on your computer. Besides such extraordinary methods of used disk space management, you surely have come across some customary tools to organize and manage files and folders. Typical applications are fine while you use ordinary folders and execute standard operations. The problem with people, although, is that we are not that standard when it comes to our hard drive needs. We could get spontaneous when we make a folder with a tongue-twisting name. The inspiration could leave, however the file or folder we made remains. And that is when conventional programs work badly. It is not so easy to view directory size. In the first place, you are to find large files and folders and ordinary applications make this job amazingly hard-to-perform. They take years to view folder size. You may have to manually search around to find files that take the most space on your PC. Sometimes these files are so well hidden, that they are literary impossible to be located. One more problem is navigation. These days an ordinary PC has hundreds of different directories, which makes it difficult to find useful and useless information. Using conventional programs, you might have to go through a lot of screens before you get somewhere. Is there a better way? There is a small but efficient application called Directory Size that can help you manage your files much easier. Directory Size features a user-friendly interface to lead you through all these to find large files and folders. Essential benefit is that it turns useful and useless information into pictures and graphs allowing you to visualize used disk space analysis. Our mind can organize and manage visuals much faster than pure numbers and bits of text. Yet another vital issue is speed. Directory Size operates in the background. It creates a map of files and folders location. That is the reason why whenever you have to get somewhere near all that data, Directory Size presents you a navigation guide that significantly simplifies files and folders location. The program helps you save money. When you can efficiently organize your useful and useless information, you do not need to get into the hype for more gigabytes. It is much more comfortable to live in a neat apartment than in a huge but messy house where you stumble every time you want to find the remote control or even the way to the bathroom. And you know what, size does matter when we speak of files and folders on your hard disk drives. Directory Size helps you locate and keep an eye on the biggest space eaters on your computer used disk space. You can even arrange folders according to their size. Thus you can always see what programs and files occupy your precious disk space used and take appropriate action when necessary. disk space analysis

Plasma Television In The Living Room

Do you want your living room to be something special in your home? If so, consider having a 50-inch plasma television set in it.

With the numerous selections of great looking 50-inch televisions available in the market, you'll definitely find one that will give the look that you want for your living room. With a 50-inch plasma television, you'll be able to see bigger and clearer pictures when watching television.

When you want to have a great looking television, you should look into all the great name brands that are on the market today. There are so many of them. Think about different options and what is going to be better for your money.

Find something that is worth the money you're going to pay. Decide on your budget and what features you want for your television. Once you know what you want, you'll be able to decide on what to buy. Choosing the most suitable television would be much easier.

Imagine yourself looking forward to coming home each day at the end of your workday. You can hardly wait to unwind by enjoying all your favorite programs on your new television set. Your new 50-inch plasma television will enable you to watch all your movies and capture the entire essence of each movie on the big and clear screen. Don't be surprised that you'll soon be the envy of all your friends and neighbors.

Getting something that is going to be more for your money is important. There are plenty of different brands of 50-inch plasma televisions. However, the most important thing that you can do is finding the one that is going to work for your needs. When you are sure that you are getting something that you can rely on and have for many years, you will be able to appreciate the investment that you have made. It is going to be something that you will be able to use repeatedly throughout the upcoming years.

Do not forget to invite all of your friends over for that big game or the movie that you have all been waiting for. You will be able to entertain all of your guests with the beauty of your own 50-inch plasma television. You and your guests will appreciate the fact that you have the larger television that is going to give off the best quality picture that you can possibly get. You will definitely be proud of your television and you may never want to leave your home again.